Orders: 7:00am - 5:00pm        Service: 6:30am - 5:00pm        Sales: 7:00am - 5:00pm

Enshu from David Olson Sales Company

JE 40 | JE 60S | JE 80 | E 130 | ES 400 | ES 450 | EV 450| EV 530 | EV 650 | EV 800

• Rigid tapping up to 6,000 rpm.
• High speed spindles up to 10,000 rpm.
• Reduced set up time with 12 station tool changer.
• Fanuc 21i control as standard
  
   

  Standard Accessories

  Complete work zone enclosure High Performance 10,000 rpm vibration free spindle Automatic tool changer Coolant system

 

Item	E 130
X-Axis Travel	15.7"
Y-Axis Travel	11.8"
Z-Axis Travel	11.8"
Rapid Traverse	1968 ipm
Cutting Feedrate	0.04-591 ipm
X-Axis Thrust	220 lbs.
Y-Axis Thrust	220 lbs.
Z-Axis Thrust	440 lbs.
Spindle Speed	100-10,000 rpm
Spindle Taper	BT 30
Spindle Bearing Dia.	1.8"
Spindle motor (Cont./15min)	AC 7.5 Hp
No. of tools in changer	12
Spindle Cooling	Permanent Grease Pack
Coolant capacity	79.3 Gal.
Pos. Accuracy	0.0004"
Repeatability	0.0001"
Machine size	52"x103"x85"
Gross weight	4,840 lbs

 

Enshu E 130

The Enshu E 130 Vertical Drill/Tap Center can be found at either end of the small parts production spectrum: As a high output cell or line module or as a very user friendly and versatile job shop machine.

JE 40 | JE 60S | JE 80 | E 130 | ES 400 | ES 450 | EV 450| EV 530 | EV 650 | EV 800

Please contact us if you would like more information about these products:
Phone: 612-722-9523
Instate:  800-582-5289
Outstate: 800-365-4910
E-mail: info@davidolsonsales.com

Pricing is subject to change without notice.  We are not responsible for typographical errors.
 See Company Policy and Trade Practices page.