Orders: 7:00am - 5:00pm        Service: 6:30am - 5:00pm        Sales: 7:00am - 5:00pm

Enshu from David Olson Sales Company

JE 40 | JE 60S | JE 80 | E 130 | ES 400 | ES 450 | EV 450| EV 530 | EV 650 | EV 800

• Fast tool exchange of just 1.0 seconds
• High speed spindles up to 10,000 rpm.
• Reduced set up time with 20 station tool changer.
• Yasnac J300 control as standard
  
   

  Standard Accessories

  Complete work zone enclosure High Performance 10,000 rpm vibration free spindle Automatic tool changer Coolant system

 

Item	EV 450
X-Axis Travel	22"
Y-Axis Travel	17.7"
Z-Axis Travel	18.1"
Rapid Traverse	1575 ipm
Cutting Feedrate	0.04-591 ipm
X-Axis Thrust	674 lbs.
Y-Axis Thrust	674 lbs.
Z-Axis Thrust	1100 lbs.
Spindle Speed	40-10,000 rpm
Spindle Taper	CAT 40
Spindle Bearing Dia.	2.6"
Spindle motor (Cont./15min)	AC 10.2 Hp
No. of tools in changer	20
Spindle Lubrication	Permanent grease pack
Coolant capacity	52.8 Gal.
Pos. Accuracy	0.0004"
Repeatability	0.00012"
Machine size	83"x96"x106"
Gross weight	9,900 lbs

 

Enshu EV 450

The Enshu EV 450 is a high performance traveling column vertical machining center designed for top efficiency on both low and higher volume jobs. Mill, drill, tap, bore; ferrous castings and non-ferrous die castings, aerospace and automotive parts, dies and molds- The EV 450 is the ideal "launch platform" to greater process capability and higher profits in your shop!

JE 40 | JE 60S | JE 80 | E 130 | ES 400 | ES 450 | EV 450| EV 530 | EV 650 | EV 800

Please contact us if you would like more information about these products:
Phone: 612-722-9523
Instate:  800-582-5289
Outstate: 800-365-4910
E-mail: info@davidolsonsales.com

Pricing is subject to change without notice.  We are not responsible for typographical errors.
 See Company Policy and Trade Practices page.