Orders: 7:00am - 5:00pm        Service: 6:30am - 5:00pm        Sales: 7:00am - 5:00pm

Enshu from David Olson Sales Company

JE 40 | JE 60S | JE 80 | E 130 | ES 400 | ES 450 | EV 450| EV 530 | EV 650 | EV 800

• Fast tool exchange of just 2.5 seconds
• High speed spindles up to 10,000 rpm.
• Reduced set up time with 30 station tool changer.
• Fanuc 16MC control as standard
  
   

  Standard Accessories

  Complete work zone enclosure High Performance 7,000 rpm vibration free spindle Automatic tool changer Coolant system

 

Item	EV 650
X-Axis Travel	63"
Y-Axis Travel	25.6"
Z-Axis Travel	26.0"
Rapid Traverse	787 ipm x,y 591 ipm z
Cutting Feedrate	0.04-394 ipm
X-Axis Thrust	3,300 lbs.
Y-Axis Thrust	3,300 lbs.
Z-Axis Thrust	3,300 lbs.
Spindle Speed	40-6,000 rpm
Spindle Taper	CAT 50
Spindle Bearing Dia.	4.3"
Spindle motor (Cont./15min)	AC 20 Hp
No. of tools in changer	30
Spindle Cooling	Oil Chiller
Coolant capacity	53 Gal.
Pos. Accuracy	0.0002"
Repeatability	0.00006"
Machine size	165"x146"x120"
Gross weight	22,600 lbs.

 

Enshu EV 650

The Enshu EV 650 is a heavy frame, "severe duty" vertical machining center. Specially designed box ways on all axes, together with a high torque, dual range CAT 50 taper spindle are more than a match for tough aerospace alloys or hardened tool steels common in the die / mold industry.

JE 40 | JE 60S | JE 80 | E 130 | ES 400 | ES 450 | EV 450| EV 530 | EV 650 | EV 800

Please contact us if you would like more information about these products:
Phone: 612-722-9523
Instate:  800-582-5289
Outstate: 800-365-4910
E-mail: info@davidolsonsales.com

Pricing is subject to change without notice.  We are not responsible for typographical errors.
 See Company Policy and Trade Practices page.