Orders: 7:00am - 5:00pm        Service: 6:30am - 5:00pm        Sales: 7:00am - 5:00pm

Milltronics Manufacturing Premier Series Machines

VM17 | VM25 | VMD30 | RW30
MiniSeries | World Series | Centurion Control

Milltronics VM17 Machining Center

• Drawers or optional conveyor for chip removal

• Automatic lubrication

• Cooled spindle cartridge

• Spindle options to 15,000 RPM

• AC Yaskawa digital servos

• 5 bearing spindle with air-purge seal

• Closed loop spindle motor

• Inverted rail design in X axis

• Fully ground machine table with 5 T-slots

• Polymer granite machine base for the ultimate in dimensional stability

• 1000 IPM rapid traverse

• Fully ground double anchored ball screws

• High speed Centurion 6 control

• Networking capable

VM17 | VM25 | VMD30 | RW30
MiniSeries | World Series | Centurion Control

Milltronics VM25 Machining Center

• Auger with washdown for chip removal

• Huge fully ground machine table with 5 T -Slots

• Automatic Lubrication

• Cooled spindle cartridge

• 20HP closed loop WYE/Delta spindle motor with options to 30 HP

• Spindle options to 15,000 RPM

• AC Yaskawa digital servos

• 110mm O.D. 5 bearing spindle with air-purge seal

• Inverted rail design in X axis

• Polymer granite machine base for the ultimate in dimensional stability

• 1000 IPM Rapid traverse

• Fully ground double anchored ball screws

• High speed Centurion 6 control

• Networking capable

The VM25 is a high speed machine that uses oversized ball screws and linear rails. That combined with heavy duty extra ribbed castings and an optional 30 HP Delta/Wye spindle motor makes this "American Made" VMC a tremendous value! Ready for heavy cutting at $71,980!

VM17 | VM25 | VMD30 | RW30
MiniSeries | World Series | Centurion Control

Milltronics VMD30 Machining Center

• AC Yaskawa digital servos

• 5 bearing spindle with air-purge labyrinth seal

• Standard two speed delta/wye 20 HP spindle

• Inverted rail design in X axis

• Heavy duty double base casting

• Automatic lubrication

• Polymer granite machine base for the ultimate in dimensional stability

• 800 IPM rapid traverse

• Fully ground double anchored ball screws

• High speed Centurion 6 control

• Optional 24 pocket vertical ATC

• Standard 6000 RPM 70mm spindle

• Optiojnal 12,000 RPM ceramic bearing spindle

• Max table load of 5,000 lbs

• Machine weight 16,000 lbs

• Optional 30 HP spindle

• Electronic Orient

VM17 | VM25 | VMD30 | RW30
MiniSeries | World Series | Centurion Control

Milltronics RW30 Machining Center

• Conversational programming

• Rigid box way construction with linear outriggers

• 63” x 23.5" table

• Machine weight of 27,000 lbs

• Double nut 2” ball screws

• Maximum table load 4000 LBS

• 6000 RPM spindle with gearbox

• Two speed 30HP Delta Y shifting spindle motor

• Electronic orient

• 32 pocket vertical ATC

• AC Yaskawa digital servos

• 600 IPM rapids

• 8000 LBS of axis thrust

• Optional coolant through spindle

• Optional chip auger with wash down

• Option chip conveyor with wash down

The RW30 vertical solid way machining center offers extremely high metal removal rate capability. The RW30 comes standard with a #50 spindle, 32 pocket arm tool changer, auger or conveyor, and much more. This 60 x 30 travel, 27,000 lb heavy weight has leading edge designs throughout the machine offering better accuracy, capacity, and reliability than many comparable products at a surprisingly low price. Call us, and we will help you to determine what machine is best suited for your application.

This machine is ready for heavy cutting!

VM17 | VM25 | VMD30 | RW30
MiniSeries | World Series | Centurion Control

Please contact us if you would like more information about these products:
Phone: 612-722-9523
Instate:  800-582-5289
Outstate: 800-365-4910
E-mail: info@davidolsonsales.com

Pricing is subject to change without notice.  We are not responsible for typographical errors.
 See Company Policy and Trade Practices page.